2002 Chevrolet Chevy Suburban Intake Manifold Replacement
download Removal Procedure Important: The intake manifold, throttle body, fuel rail, and injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a...
View Article2002-2005 Subaru Impreza WRX/STI Cold Air Intake Installation Guide
download Removal of Factory Intake 1. 2. Turn the ignition OFF and disconnect the vehicle’s negative battery cable. Loosen and remove the two bolts that secure the air inlet duct to the radiator core...
View Article1986-1995 Ford 5.0L V8 with EGR INTAKE MANIFOLD INSTALLATION INSTRUCTIONS
download REMOVAL: 1. Disconnect battery negative cable and drain cooling system. 2. Disconnect necessary electrical connections, control cables, linkages, vacuum hoses, ventilation hoses, and coolant...
View Article1999 Ford Truck F 250 2WD Super Duty Intake Manifold Installation
download 1. Position the lower intake manifold gasket and the upper intake manifold on the intake manifold and loosely install the ten bolts. 2. NOTE: Tighten the bolts in two stages. Tighten the bolts...
View Article2000 Ford Windstar Intake Manifold Lower Removal Installation
download 1. Partially drain the cooling system. For additional information, refer to Section 303-03. 2. Remove the upper intake manifold (9424). For additional information, refer to Intake...
View Article2002 Ford Windstar Intake Manifold Lower Removal
download CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages,...
View Article2002 Chevrolet Impala Intake Manifold Replacement – Lower Removal Procedure
download 1. 2. 3. 4. Disconnect the negative bakery. Remove the upper intake manifold. Remove the left valve rocker arm cover. Remove the right valve rocker arm cover. 5. Disconnect the Engine Coolant...
View Article2006 Ford Five Hundred SE Upper Intake Manifold Removal
download All vehicles 1. Drain the cooling system. For additional information, refer to DRAINING . 2. Disconnect the battery ground cable. For additional information, refer to REMOVAL AND INSTALLATION...
View Article1997 Chevy C Tahoe Intake Manifold Replacement (Upper)
download REMOVAL 1. Disconnect the battery negative cable assembly from the battery negative terminal. 2. Remove the air cleaner assembly. Refer to Powertrain Management. 3. Remove the wiring harness...
View Article1997 Chevy K 1500 Intake Manifold Replacement (Upper)
download REMOVAL 1. Disconnect the battery negative cable assembly from the battery negative terminal. 2. Remove the air cleaner assembly. Refer to Powertrain Management. 3. Remove the wiring harness...
View Article
More Pages to Explore .....